Overview
- Rating : 250V-10A
- Insulation resistance : DC500V, 100MΩ Min
- Withstand voltage : AC2000V 1 minute
- Certificates & approvals : UL, C-UL
- Main insulator : P.B.T. (UL94V-0)
- Body color : W (Wite)
- Terminal type : Screw driver(M4X8 Sems screw )
- Installation screw torque : 1.2N·Max , 1.0N Max: M4 Screw(M4=3.8mm/0.150 inch)(When using Flat washer)
- Suitable Din Rail : (Top hat shape )width:35mm
- Noeon Lamp :
- Usage Voltage : AC100V-250V
- Protector Resistance (installed) : 150ｋΩ、1/4W
- Discharge Start Voltage : Below AC75V
- Discharge Current : 100V:Approximately0.3mA,200V:Approximately0.96mA,250V:Approximately1.3mA
- Neon Lamp Life : 100V(Approximately 60,000 hours)(continuously) 200V:(Approximately 30,000 hours)(continuously) 250V:(Approximately 20,000 thours)(continuously)
- Mate fuse : ø6.4×30mm,ø6.35×30mm,ø6.35×31.8mm
- Caution : meltdown indicator Fuse carrier Installed ., capable to use at Multi-position.
1.Do not open the cap of the Fuse Holder when Voltage is applied to the state.
2.deformed clip will caused overheating and will catch on fire.
3.Be caution of flux don't adhere to the part between fuse and inside of clip when soldering.
4.Please combine the Fuse and Fuse clip after the soldered product has cooled down.
5.Don't use in the water.
6.Do not use outside of room to avoid sunlight.
- Note: : 1. Optional order products .
2. Usage Voltage:AC100V-250V.
Features
- Connection : Horizontal type
- UL : E101405
- RoHS : RoHS Compliance
Dimension
Lineup
Please be sure to check the following terms and conditions.
Please be sure to check the following terms and conditions.
